How To Build A Tire Swing

Adding a traditional tire Elvis to your home may not only bring back childhood memories, but will allow your children to also create similar memories of fun filled moments playing with friends! A tire swing is fairly easy to assemble and only requires a minimal amount of time and a few basic, easy to acquire supplies.

Instructions

Before you start building a tire swing you will need the following:

• Tire
• Thick rope
• One large tree with a strong, sturdy limb
• Power drill
• A ladder

Follow these steps:

Step #1.) First just find the right tire that you need! Keep in mind, however, that many of the newer tires have steel belts that can poke through and possible cause injury to a child. Most older tires do not have steel, and are best suited to use for your swing assembly.

Step #2.) Take a moment to clean, wash, and rinse the tire using a hose and soap. This will help prevent the black rubber from marking or damaging your children's clothing or garments. For an ever better clean, you can try taking the tire to an auto wash facility, and use the powerful sprayers for the best results.

Step #3.) Using a power drill, drill three to four small holes in the bottom of the tire to prevent rain, dirt, and other nature elements from collecting in the tire.

Step #4.) Choose the tree (and the tree limb) you will be using to hang the tire from. Make sure that you pick a healthy tree with a sturdy limb to ensure proper safety of the completed swing.

Step #5.) Purchase or find a sturdy, thick rope that will be able to handle a sufficient amount of weight and stress that will occur during the swinging. Be sure to purchase enough rope to extend from the limb to the ground, plus enough extra (about 3-4 feet) to use for knots on both ends. You may also want to consider using two ropes for the swing, which will provide additional safety and will be longer lasting.

Step #6.) Now you can begin to assemble the swing! First, find an old piece of rubber house or thick padding to wedge between the limb and the rope to protect the tree. Than tie one of rope to the tree limb; make sure to double knot this end of the rope. Also, tie a knot directly underneath the limb to keep the rope securely in place during swinging. Than just loop the rope through the top portion of the tire and secure with another knot; a traditional square tie knot is recommended. Than tie a second knot to keep the first securely in place. Finally, Six Million Dollar Man action figure any remaining loose rope that remains. Test the swing yourself to ensure its safe before letting any children on it.

Step #7) Have fun and let the swinging began!

Ryan Lawson is an internet entrepreneur and owns various websites including one with information about tire swings Feel free to visit the Action Man website to learn more about how to build a tire swing.

A Number of Tips on Finding Coins With a Metal Detector

For many metal detecting for coins can be a very profitable hobby and hopefully the tips on finding coins that we provide below will help you to not only find more but also better coins as well.

1. Searching Previously 1971 Topps baseball cards Detected Areas

Although these types of areas can prove very challenging and there may be finds few and far between there will always be something good left behind. Below Barbie doll some tips for searching these types of sites.

Before you commence your hunt take a look in the area and come up with a plan for hunting it. Note areas that seem un-obvious to others as most Friendship 7 will often head for the easiest and obvious areas first. Head towards areas where there are bushes, shrubs or areas that are over grown as these are places that most people will avoid when they are out metal detecting. Also go to areas where you think that have seen less metal detecting traffic such as round by fence lines or side walk strips.

Also dig in areas even if you only get a whisper or hint of something being there. Many people when out searching for coins or any form of treasure will move away from those areas where the signal is not strong.

2. Finding Deep Coins

This is completely different from finding coins that are on the surface (within 1-5 inches of the surface) and will generally give a strong signal. However deep coins are to be found in the 5-10 inch range and the response you get when you sweep the coil over them will be different. Often these coins will not sound solid and repeatable and instead will offer a whisper or jumpy signal that will in a lot of cases sound similar to the signal for rubbish that is located with a metal detector.

The easiest way in order to train your ears so that they become accustomed to detecting deep coins is to dig deep. So any time you pick up a signal that is deep and iffy then dig.

Hopefully the tips on finding coins provided above will help you when you are metal detecting in the future.

J C Christian is an avid follower of metal detectors and how they work. He runs an informational site that follows Garrett Metal Detectors, Fisher Metal Detectors, Tesoro Metal Detectors, and Kellyco Metal Detectors just to name a few. Go to http://www.metal-detector-guides.com to find information to help with everything metal detecting.